Configuring Storage; Configuring Storage Schedules - Honeywell HRHT4041 Remote User Manual

80 | Performance Series HQA Digital Video Recorder Remote User Guide

Configuring Storage

Configuring Storage Schedules

You can add or remove schedules for recording.
There are five recording modes: General (auto), Motion Detect, Alarm, MD&Alarm, and Intel.
You can configure up to six periods per day.
www.honeywell.com/security
Table 3-17 Configuring for Abnormalities
Configuration
Event Type
Enable
Voice Prompts
File Name
Show Message
Alarm Upload
Send Email
Buzzer
Message
Log
Alarm Upload
Description
Select from No Disk, Disk Error, Disk No Space, Net
Disconnection, IP Conflict, MAC Conflict, or Illegal Login.
Less Than: (For No Space configuration only) Configure the
minimum percentage of free space on the disk. An alarm lets
you know when the disk capacity is low. You need to click to
enable this function.
Click to enable this function.
Select to enable audio broadcast/voice prompts in response to
the event you selected in the drop-down list of event types.
Select a file name for the voice prompt.
Click to enable a pop-up message on your local host PC
screen to let you know an alarm has occurred.
The system can upload the alarm signal to the center
(including the alarm center).
The system can send an email when an alarm is detected.
When you have enabled the Snapshot function, the system
can also send an image attached to the email. Go to Main
 
Menu Setting Network
settings. Refer to the User Guide for more information.
Click to enable the Buzzer function. When an alarm occurs,
the buzzer beeps.
Enable to send a message to the device which supported the
3G/4G module when the event triggers.
Click to enable the DVR to record a local alarm log.
Enable to allow the web client to receive the alarm information
when triggered by an event.

Email to configure the email