Removing An Alarm Station; Disabling/Enabling The Dial-Up Server; Alarms From A De-Listed Or Unregistered Unit - Honeywell Rapid Eye Administrator's Manual

Removing an Alarm Station

Disabling/Enabling the Dial-Up Server

Alarms from a De-Listed or Unregistered Unit

Document 800-02953V4 Rev A
03/10
1. Using Admin, click the Alarm Stations tab.
2. Select the alarm station that you want to delete.
3. To remove the selected Alarm Station, do one of the following:
• Click on the toolbar.
• Click Delete on the Actions menu.
• Press the Delete key on the keyboard.
4. You will be asked to confirm the deletion. Click Yes to continue or No to cancel.
For some mission critical applications, your IT personnel may wish to disallow access to the
Microsoft Windows procedure to disable and enable a RAS server on a PC.
Situations
View operators are warned with a message when a call about an alarm is from a Multi-Media
unit that has been:
• Removed from a Multi-Media database (Multi db). Your Multi-Media system
administrator (Multi SA) can remove a Multi-Media unit from a Multi db. However, the
de-listed unit that you have removed may still be operating at a customer site, set to
call a PC designated as a Multi-Media alarm station.
• Added without registration to a Multi-Media database. To register a Multi-Media unit, a
View operator must invoke the first
without the right to use the commands of a Maintenance Session can start a
Maintenance Session to register a unit.
A message appears in both situations. When the operator receives the message, calls
about the alarm have stopped.
Rapid Eye Multi-Media DVR System Administrator Guide
Maintenance Session on the unit. Even users
237