Uploading A File To A Multi-Media Unit; Figure 8-4 Downloading The System.log File From A Multi-Media Unit - Honeywell Rapid Eye Administrator's Manual

Configuring Other Hardware
To receive a
system file from
a Multi-Media
unit.

Uploading a File to a Multi-Media Unit

146
Figure 8-4 Downloading the System.log File from a Multi-Media Unit
An upgrade to a Rapid Eye Multi-Media unit, or its reconfiguration, means uploading new
system files to the unit.
Caution Only trained View operators should perform uploads on a Rapid Eye
Multi-Media unit.
1. Continue or start a Maintenance Session
Before proceeding, check if the System Operational message appears in the
2.
Feedback box.
3. Click the System Files tab.
4. Click Upload. The Send file to remote site dialog box appears.
5. Specify the name of the file that you are planning to upload, and its location (on the
PC or network).
Caution Double-check that you are uploading the correct file.
The file name should not be more than eight characters long. Uploading
the wrong file can halt a Multi-Media unit, causing that site to become
inoperable.
6. Click Open. A copy of the file is sent to the Multi-Media unit; its name appears in the
Temporary files pane. Uploading on slow connections can take a few minutes.
7. Either:
• Click Promote, OR
• Abandon the upload by clicking Clear, then skip the next step.
for the Rapid Eye site.