Removing A System Password; Remove Password From All Units; Figure 10-4 After Removing A System Password - Honeywell Rapid Eye Administrator's Manual

Security for a Multi-Media System

Removing a System Password

To remove the system
password on Multi-Media
units, delete all of the
asterisks (*) in the
password boxes.

Remove Password from All Units

188
You can remove a system password from either:
• All of your units, globally. If your Rapid Eye system consists of a single unit, you can
use this procedure too. See
• Only one of many units. To remove a system password from a unit that needs
servicing (for example) while leaving it on other units in your system, see
Password from One of Many Units
Figure 10-4 After Removing a System Password
1. Run Admin to access the System Password window. Either:
• Click on the Admin toolbar.
• Click the System Password command in the File menu.
F8
• Press the key.
2. Delete the asterisks from the System Password field.
3. Delete the asterisks from the Confirm Password field. The System Password window
should look like Figure
4. Click Save and Close.
5. Using View, click
6. Click the Security tab in the Maintenance window.
7. Click Update Security on the Security tab. You have the option of ending the
Maintenance session (see
8. Repeat steps 5 to 7 for each Multi-Media unit in your system.
9. The Multi SA needs to tell site users whose System password has been changed, to
refresh their copy of the Multi db, the next time that they use View. See
Local Database on page 277.
Remove Password from All Units
on page 189.
10-4, above.
to start a Maintenance Session
page 71).
on page 188.
Remove
for a site.
Refreshing a