Adding a Schedule
Customizing a Schedule
Document 800-02953V4 Rev A
03/10
1.
Continue or start a
Maintenance
2.
Select Define Schedules. The tab displays the grid of the Default schedule.
3.
Click in the Schedule box and enter a name for the new schedule. Click Add when
the button becomes available.
4.
Select or deselect cells in the Time/Day grid, as needed. Use the following options to
set up the schedule:
•
Cell-by-cell. Click the cells of the Basic schedule grid, as needed. Clicking the
cells toggles a time from ON (dark) to OFF (light), or OFF to ON. See
•
By a block of cells. Drag the mouse pointer over cells. When you release the
mouse button, a menu appears showing the Fill Block and Clear Block
commands. Click a command, as needed.
•
Globally. Right-click the mouse button to display a menu of commands for
customizing more than one cell at once (Clear Row, Fill Row, and so on). See
Figure
7-3.
Figure 7-3
Customizing a Schedule
1.
On the Schedules tab, during a
tab displays the grid of the Default schedule (see
2.
Use the Schedule drop-down arrow to select a schedule that you want to customize.
3.
Select or deselect cells in the Time/Day grid, as needed. The customization is saved
automatically. Use the following options to set up the schedule:
•
Cell-by-cell. Click the cells of the Basic schedule grid, as needed. Clicking the
cells toggles a time from ON (dark) to OFF (light), or OFF to ON. See
•
By a block of cells. Drag the mouse pointer over cells. When you release the
mouse button, a menu appears showing the Fill Block and Clear Block
commands. Click a command, as needed.
•
Globally. Right-click the mouse button to display a menu of commands for
customizing more than one cell at once (Clear Row, Fill Row, and so on).
Customizing the Default Schedule
By default, all of a Multi-Media unit's cameras and alarms are assigned to the Default
schedule. Customizing the Default schedule is the quickest way to coordinate a unit for all
cameras and alarms.
Rapid Eye Multi-Media DVR System Administrator Guide
Session. Click the Schedules tab.
Maintenance
Session, select Define Schedules. The
Figure
Figure
7-4.
7-3).
Figure
7-4.
119