Internal SCSI Data Cable
Removing the Internal SCSI Cable
1. Shut down and power off the system.
See "Powering Off the System" on page 43.
2. Detach all external cables from the rear panel except the power cord.
3. Remove the cover and attach a wrist strap.
See Chapter 7.
4. Unplug the DC power, SCSI data, diskette data, speaker/LED, and CD-ROM
audio cables from the system board (see Figure 9–13).
You may need to remove an SBus card to access the audio connector. See
"Removing an SBus Card" on page 102.
Figure 9–13
System Board Cable Connections
81
Storage Devices