Sun Microsystems SPARCstation 5 Service Manual page 164

Consult your software documentation for instructions on ending a work session
and saving your files.
2. Return to the operating system environment.
If you are in a windowing environment, exit from it and wait for the operating
system prompt to appear. See the documentation supplied with your windowing
system.
3. Halt the operating system.
See the documentation supplied with your operating system for instructions on
how to halt it.
a. For Solaris 2.x (SunOS 5.x) systems, type:
b. For Solaris 1.x (SunOS 4.x) systems, type:
4. Enter n at the > prompt to get to the ok prompt.
5. Enter reset at the ok prompt.
6. When you see the system banner, press Stop-a to access the FORTH Monitor.
7. If you see the > prompt, enter n to get to the ok prompt.
8. Enter help diag at the ok prompt to get a list of tests that comprise
the FORTH Diagnostics.
9. Enter the name of the test you wish to execute.
The following example shows a list of FORTH Diagnostic tests.
SPARCstation 5 Service Manual ♦ Revision A, August 1994
150
% su
Password: superuser password
# /usr/sbin/shutdown -y -g60 -i0
% su
Password: superuser password
# /usr/etc/shutdown -h +1
The operating system warns other users of your system of the impending
shutdown, and then halts itself after a one-minute delay. If you wish to
provide a longer delay, see the man page for shutdown(1).
The system synchronizes the file systems and brings you to either the > or ok
prompt.
If you see the ok prompt, skip ahead to Step 5; otherwise, continue with Step 4.