Replacing An S24 Frame Buffer Card - Sun Microsystems SPARCstation 5 Service Manual

Figure 11–11
7. Continue to lift the extractor while lowering the opposite end of the card to
free it from the back panel.
Place the faulty S24 card on an antistatic surface.

Replacing an S24 Frame Buffer Card

1. Locate the AFX Bus slot on the system board.
See Figure 11–10.
2. Push back the two card retainers on the AFX Bus slot (if necessary).
See Figure 11–10.
SPARCstation 5 Service Manual ♦ Revision A, August 1994
110
Removing an S24 Frame Buffer Card