System Board Layout - Sun Microsystems SPARCstation 5 Service Manual

Caution - The system board and related modules and cards have surface-mount
components which may break if the board is flexed.
To minimize the amount of board flexing, observe the following precautions:
4 Hold the system board only by the edges.
4 Do not place the system board, SBus cards, DSIMMs, or chips on a hard surface.
Use a cushioned antistatic mat. See Chapter 12.
4 Transport the board in an antistatic bag.
Protect yourself and the equipment by observing the safety precautions described in
Chapter 5.

System Board Layout

Figure 10–1 shows the major components on the system board.
Figure 10–1 SPARCstation 5 System Board
SPARCstation 5 Service Manual ♦ Revision A, August 1994
98