Figure 8–7
Speaker Connections
Replacing the Internal Speaker
Caution -
Do not touch the black inner surface of the speaker. Handle the speaker
only by the metal frame to avoid damage.
1. Pull the speaker end of the speaker/LED cable through the speaker opening in
the chassis wall.
2. Unpack the replacement speaker.
3. Slide the fast-on connectors at the end of the speaker/LED cable onto the
terminals of the replacement speaker.
See Figure 8–7.
Note -
One connector and terminal pair is larger than the other. They are sized
differently to ensure proper connection.
63
Major Subassemblies