Sun Microsystems SPARCstation 5 Service Manual page 73

Figure 8–4 Positioning the LED Cable
2. Route the cable behind the diskette drive bracket and connect it to the in-line
connector of the speaker/LED cable.
See Figure 8–4.
3. Reinstall the CD-ROM drive (if necessary).
See "Replacing the CD-ROM Drive" on page 72.
4. Detach the wrist strap and replace the cover.
See Chapter 7.
5. Power on the system.
See "Powering On the System" on page 46.
59
Major Subassemblies