Replacing The Cover - Sun Microsystems SPARCstation 5 Service Manual

Figure 7–3
2. Peel the liner from the copper foil at the opposite end of the wrist strap and
attach that end to the top of the power supply.
Make sure that the strap makes good contact with the metal casing of the power
supply; avoid the labels on top of the supply. See Figure 7–3.

Replacing the Cover

1. Remove the wrist strap from your wrist and then from the power supply.
2. Align the cover hinge tabs with the tab slots on the bottom front of the system
chassis. Carefully lower the cover, making sure the hinge hooks remain inside
their respective slots.
SPARCstation 5 Service Manual ♦ Revision A, August 1994
50
Grounding the Wrist Strap to the Power Supply