Sun Microsystems SPARCstation 5 Service Manual page 75

Figure 8–5 Removing the Speaker Cover
7. Use the screwdriver to deflect the third tab, behind the top corner of the
speaker cover, and remove the speaker cover.
Caution -
Use care when working near or handling the speaker to avoid damaging
the speaker surface. Do not touch the diaphragm with tools or your fingers. Grasp
the speaker by the metal edges only.
8. Use a Phillips-head screwdriver to remove the two screws that secure the
speaker to the system chassis.
Save the screws for installing the replacement speaker. See Figure 8–6.
61
Major Subassemblies