Figure 10-14 Replacing The Sbus Card - Sun Microsystems Ultra 1 140 Service Manual

10
10-16
Tab (2)

Figure 10-14 Replacing the SBus Card

5. Align the connector with the SBus socket. Gently press the corners of the
card to push the connector into the socket.
Do not force the card, or you may damage the pins on the card. If the SBus
card is located in SBus slot 0 or 1, see Figure 10-15. If the SBus card is
located in SBus slot 2, see Figure 10-16.
6. Lock the card retainers.
•
If the SBus card is located in SBus slot 0 or 1, push the rear card retainers
forward over the edge of the SBus card. See Figure 10-15.
•
If the SBus card is located in SBus slot 2, push the card retainer down.
See Figure 10-16. There is only one card retainer for the SBus slot 2.
Sun Ultra 1 Series Service Manual—November 1995
Backplate
SBus card