Use Own Ship's Track; Display Own Ship's Track (Display Own Track) - JRC JMA-7133-SA Instruction Manual

3.5

USE OWN SHIP'S TRACK

The own ship's track function saves and displays own ship's track.
If navigation equipment is connected, this radar system records latitude/longitude
data sent from the navigation equipment and displays own ship's track.
3.5.1

Display Own Ship's Track (Display Own Track)

Procedures
Left-click the Own Track Color
1)
lower right of the display.
Own Track Color
Map On/Off
The color of the own ship's track are switched.
2) Left-click the
display.
>
JMA-7100 Instruction Manual
NOTE: Even when own ship's track storage interval is turned
, own ship's track can be displayed. However, in this
Off
case, if rewrite operation such as changing of the display
range is performed for the radar display, own ship's track
display is erased and the track will not be plotted again.
If the own ship track display is turned off when own ship
track is in storage, own ship's tracks are not shown on the
radar display, but own ship's track is still saved.
The own ship's track function is available between latitudes
of 85°N and 85°S.
Own Track Interval
→ →
Off White
←
Red Pink
button located at the lower right of the
Map
3－ 39
>
3.BASIC OPERATION 3.5 USE OWN SHIP'S TRACK
button located at the
Track
Own Track Interval Unit
→
Gray Blue
← ←
Yellow Green
3