Problems Using The Max 8 Or Max 8 Plus - Net2Phone Max 8 User Manual

Max 8 and 8 Plus User's Guide Appendix A
checked the "Use account for all fields"
check-box and saved the changes. Now
the different accounts I had in each port
are no longer present. How can I put
them back?
You must make sure the Use account for
all fields checkbox is unchecked, and enter
the account information again manually.
When I dial the extensi on that I routed to
port 1, it rings port 2, and when I dial the
extension I routed to port 2, it rings port
3, etc...
In the Routing Table Configuration page,
make sure you routed each extension to the
logical port number of the desired port, not
the labeled or physical port number. To find
the logical port number for each port, refer to
Section 4.5.1, Logical Port Numbering.
A. 4 Problems using the Max 8 or Max 8
Plus
When I attempt to make a call, I hear a
fast busy signal.
Click the Show Log Messages link to
access the Current System Log Messages
page (Section 4.7.2, Show Log Messages).
Then check to see if 00 REL
DM_NOT_SPECIFIED is displayed. This
would indicate that the doorman servers
cannot be found. Make sure that the DNS
server IP parameter values are correct so
that the doorman can be reached.
75