Max 8 and 8 Plus User's Guide
Figure 5 – Turning DHCP On (or Off) from HyperTerminal
2.2.2.2 Entering an IP Address
In step 3 of Section 2.1.2.2,
Obtaining the Max's DHCP IP
Address via HyperTerminal, the
menu illustrated in Figure 5 appears:
To connect to the Max Web Manager, you
will need to enter at least an IP address
and netmask.
To enter the Max's IP parameters:
1. At the Enter <parameter>:
prompt, enter 1 to change the IP
Address.
The
prompt appears.
2. At the Enter IP Address:
prompt, enter the IP address
you wish to assign, followed by
the Enter key.
The Max confirms your entry.
The confirmation scrolls by
quickly, so you need to scroll up
to see it.
disable and then press
the Enter key.
Enter IP Address
21
Section 2