Max 8 and 8 Plus User's Guide
1.4 Installing the Max 8 Unit
Install the unit in a well-ventilated area. If it is to be
placed on a surface rather than in a rack, be sure
that all four rubber feet are in place to allow for
proper air circulation. Do not place objects in
excess of 20 pounds on top of the unit.
To install the Max 8:
1. Connect the analog telephones to the RJ-11
ports.
2. Connect the RJ-45 LAN port to an Ethernet
socket, router, hub, or switch.
3. If your installation includes a PBX, connect it
as illustrated in Figure 1.
4. Plug the Max 8 into your power outlet and
turn the unit on.
Your Max 8 hardware setup is now complete. The
next step is to connect the unit to your LAN so that
you can browse the Max Web Manager.
5. Test your installation by making
an Internet telephone call.
Please refer to the Max 8 and 8 Plus
Hardware Installation Guide and observe
the safety precautions listed.
6
Section 1