Max 8 and 8 Plus User's Guide
4.7, Current System Log Messages). The user can
modify the local addresses.
Logical Port Numbers are used in configuring the
Current Routing Table. For more information, see
Section 4.3, Configuring Accounts).
4.2 Network and Voice Configuration
Figure 11 – Network and Voice Configuration Tables
Figure 12 – Network and Voice Configuration Tables
To modify the parameters on the Network and
Voice Configuration page, simply enter the desired
values into the respective boxes.
The IP Configuration table displays all the Max 8
and Max 8 Plus's IP-related parameters.
The Voice Configuration table displays the Jitter
Buffer Bounds, which are used to control the
Quality of Service (QoS). The upper and lower
bounds can be changed; larger bounds produce
less packet loss, while smaller bounds produce
30
Section 4