Net2Phone Max 8 User Manual page 41

Max 8 and 8 Plus User's Guide
Max Port #
1
2
3
4
5
6
7
8
In this example, the range to be opened is 7000 to
7015. The range is determined by the following
formula:
Max Default Start Port + (# of Max Ports * 2) – 1
The table shows the firewall port assignments
based on the default start port. If the Max
gateway default start ports noted above are in
conflict with your corporate firewall settings, you
may assign port numbers in the range of 4000 to
65000 by applying the same principle illustrated in
the table.
The TCP Port and UDP Port start parameters in
the Network Configuration table must match the
open firewall ports.
Firewall
Port Type
UDP Port (OPAL)
UDP Port (OPAL)
UDP Port (OPAL)
UDP Port (OPAL)
UDP Port (OPAL)
UDP Port (OPAL)
UDP Port (OPAL)
UDP Port (OPAL)
or in this example:
7000 + (8*2) – 1 = 7015
33
Section 4
Firewall Port
Numbers
7000 - 7001
7002 - 7003
7004 - 7005
7006 - 7007
7008 - 7009
7010 - 7011
7012 - 7013
7014 - 7015