Net2Phone Max 8 User Manual page 81

Max 8 and 8 Plus User's Guide
Stop Bit
Flow Control
Make sure the serial cable is connected and
fastened to both the Max 8 Plus and your
computer.
My network supports DHCP, but my Max
8 or Max 8 Plus cannot obtain correct
network settings.
I set DHCP to ON, but my Max 8 or Max 8
Plus cannot obtain correct network
settings.
My analog phone does not have a period;
how do I enter the periods in my IP
address and netmask?
Use the star key (*) in place of the periods.
1. Make sure DHCP is enabled.
2. Make sure the RJ-45 LAN cable is
connected securely to your Max 8
Plus and LA N, hub, or router.
3. Make sure that all network ports,
routers, or hubs are live.
1. Make sure your network supports
DHCP.
2. Make sure your RJ-45 LAN cable is
securely connected to both the Max 8
Plus and to the LAN, hub, or router.
3. Make sure that all network ports,
routers, or hubs are live.
73
Appendix A
1
None