Single Account Management - Net2Phone Max 8 User Manual

Max 8 and 8 Plus User's Guide
4.3.1

Single Account Management

For single account management:
NOTES:
1. To receive Max-to-Max calls when multiple
ports are sharing a single account, only one
of the ports sharing the account may have
the Y selected.
2. Only one call at a time can be made using
any given account number. If a Net2Phone
account number is entered for an FXO port
in the Account Configuration Table, the
account entered acts as a default account
for the port. Charges incurred by callers
through that port automatically accrue to
this account.
3. Whenever a selection in the Login column is
modified, the Max must be restarted before
the change will take effect.
1. In the box for Port #1 in the Account
column, enter a Net2Phone account
number.
2. In the PIN field, enter the Personal
Identification Number for that account.
3. Check the Use account for all ports
checkbox.
4. If you wish to be able to receive
incoming Max-to-Max calls on a given
port, select the Y radio button in its
Login column.
5. After the desired changes have been
entered, click the Save button at the
bottom of the page to save them.
6. Click the Restart System link on the
Site Map page to reboot the system.
37
Section 4