Using The Max Web Manager; Port Configuration - Net2Phone Max 8 User Manual

Max 8 and 8 Plus User's Guide Section 4

4. Using the Max Web Manager

Each of the various configuration pages is accessed by
clicking its link on the Site Map. For example, click the
Port Config link to access the Port Configuration page,
illustrated below.

4.1 Port Configuration

Figure 11 – Port Configuration Table
The Port Configuration page's Address Table
Configuration sheet shows the Max 8 or Max 8 Plus's
current hardware and port configurations. The Interface
Type, Physical and Logical Port Numbers, and their
Local Addresses are listed.
The Interface Type column does not pertain to the Max 8,
since its ports are all FXS type ports.
The Local Address serves only as the source text for
identification in the System Log Messages (see Section
29