Net2Phone Max 8 User Manual page 43

Max 8 and 8 Plus User's Guide
Figure 13 – Network Configuration Table
3. Save your settings and restart the Max 8/16
NOTE: Some firewalls require the opened port to be
forwarded to the Max 8/16 or T1/E1's IP address.
Consult your LAN administrator to determine if this is the
case with your firewall.
21057 in step 1-c, enter
TCP Start Port as shown in Figure 13 –
Network Configuration Table, below,
illustrating the Network Configuration
Table on the Network and Voice
Configuration page.
b. Change the UDP Start Port to the port
you opened in step 1-b above. For
example, if you opened UDP PORT
21000 in step 1-b, enter
UDP Start Port as illustrated in Figure
13 – Network Configuration Table,
below.
or T1/E1:
After you have made the desired changes,
click the Save button at the bottom of the
page to save the new settings, then restart
the unit.
The new settings should now be in effect.
21057
21000
35
Section 4
for the
for the