Net2Phone Max 8 User Manual page 22

Max 8 and 8 Plus User's Guide
Baud rate
Parity
Character size
Stop Bit
Flow Control
4. Turn on power to the Max 8 or 8
Plus, then press the Enter key on
your PC.
The boot messages are displayed,
followed by the command prompt
MAX:>.
NOTE: n2p is the default system name with
which the unit is shipped. You can replace
this name with a name that you select, such
as " MY_Max:
name, see Section 4.5, System Information
and Commands, or Section 2.5 in the Max
8 or 8 Plus Command Reference Guide.
5. Press the Enter key.
The Login: prompt is displayed.
6. Three default user IDs are
provided:
? ? root
? ? manager
? ? sysadm
7. Type one of these user IDs at the
Login: prompt, followed by the
Enter key. For example, type
root, followed by the Enter key.
The Password:: prompt appears.
8. At the Password: prompt, type
the default password, MAX,
followed by the Enter key.
The command line prompt MAX:>
14
19200
None
8
1
None
". To change the system
>
Section 2