Obtaining The Max 8 Dhcp Ip Address Via A Telephone Keypad; Connecting To The Max 8 Or 8 Plus Through A Serial Cable - Net2Phone Max 8 User Manual

Max 8 and 8 Plus User's Guide
2.1.1 Obtaining the Max 8 or Max 8 Plus
DHCP IP Address via a Telephone
Keypad
For many users, the handiest way to query
the Max 8's or Max 8 Plus's current IP
address will be from a telephone keypad. To
use this procedure, you will need a standard
analog corded or cordless touch-tone
telephone.
NOTE: To use this method for the Max 8
Plus, there must be an FXS card installed.
1. Connect your telephone to any FXS
2 Pick up the telephone handset and dial
3. Write down the address and hang up
You are now ready to finish setting up the
Max 8 using the Max Web Manager.
Proceed to Section 3, Logging in to the
Max Web Manager.
2.1.2 Connecting to the Max 8 or 8 Plus through
a Serial Cable
Although the serial connection allows you to
set many of the Max 8 or Max 8 Plus's
parameters, this section will only explain how
to connect to the Max and obtain its DHCP IP
address. The remaining configuration tasks can
(RJ-11) port on the Max 8.
***
1 (***1 on the keypad). The voice
prompt responds, "Your IP address is..."
and the IP address is announced.
the telephone. If you need to hear the
address again, hang up the telephone,
then repeat step 2.
12
Section 2