Net2Phone Max 8 User Manual page 48

Max 8 and 8 Plus User's Guide
Figure 15 – Remote Access IVR Configuration Table
The Remote Access IVR function permits
system managers to select the announcement
that will greet callers on an FXO port; in addition,
the system managers can designate the security,
call forwarding, or other options that may be
applied to the port.
To configure the Remote Access IVR
Configuration Table:
1. Make sure the FXO port you are
2. Be certain that a PBX or PSTN
3. Select one of the following six modes for
configuring is connected to the analog
line card of a PBX unit.
telephone number has been assigned to
the port.
the port (only one mode at a time may be
selected):
? ? IVR Off – When IVR Off is selected
for a port, callers to the port get an
immediate VoIP dial tone and can
make VoIP calls without restriction.
40
Section 4