Note
Clear the Discoverable check box if you don't want other Bluetooth
devices to see your phone.
To change the phone's device name
The device name identifies your phone in a Bluetooth network.
1.
Make sure that you have turned Bluetooth on.
2.
On the Wireless controls screen, tap Bluetooth settings > Device name.
3.
Enter the name for your phone in the dialogue box, then tap OK.
Your new device name appears on the Bluetooth settings screen.
To pair and connect a Bluetooth hands-free headset or car kit
Before you can use a Bluetooth hands-free headset or car kit, you must pair it first
with your phone.
Note
Pairing between two Bluetooth devices is a one-time process. Once
pairing is created, the devices can recognize the partnership and
exchange information without entering a passcode again.
1.
Make sure that you have turned Bluetooth on. See "To turn on Bluetooth and
make the phone discoverable (visible)" earlier in this chapter.
2.
Press HOME > MENU, then tap Settings.
3.
Tap Wireless controls > Bluetooth settings. Your phone will start to scan for
Bluetooth devices within range and will display all detected devices below the
Bluetooth devices section.
4. Tap the hands-free headset or car kit in the list to start pairing.
Tip
If you don't find the device in the list, press
devices to scan again.
Getting Connected
, then tap Scan for
3