Clutch Lifter - Suzuki GSX-R750 Service Manual

Hide thumbs Also See for GSX-R750:

Table of Contents

CLUTCH SPRING INSPECTION

• Measure the free length of each coil spring with a vernier cali-

pers, and compare the length with the specified limit.

• Replace all the springs if any spring is not within the limit.

 Clutch spring free length:

Service Limit: 53.2 mm (2.094 in)

 09900-20102: Vernier calipers

CLUTCH BEARING INSPECTION

• Inspect the clutch release bearing for any abnormality, partic-

ularly cracks, to decide whether it can be reused or should be

• Smooth engagement and disengagement of the clutch

depends on the condition of this bearing.

CLUTCH SLEEVE HUB/PRIMARY DRIVEN GEAR ASSEMBLY

• Inspect the slot of the clutch sleeve hub and primary driven

gear assembly for damage or wear caused by the clutch

plates. If necessary, replace it with a new one.

CLUTCH LIFTER

CLUTCH LIFTER DRIVE CAM AND DRIVEN CAM INSPEC-

• Inspect the clutch lifter drive cam and driven cam for wear or

• If any defects are found, replace the clutch lifter drive cam or

Show Quick Links

Table of Contents