3-100 ENGINE
• Fit a new gasket 1.
Use a new gasket to prevent oil leakage.
• Install the cam chain tension adjuster.
Cam chain tension adjuster mounting bolt:
• Turn the crankshaft approx. 180° counterclockwise to make
the push rod come out from the adjuster against the cam
chain, via chain tensioner.
NOTE:
When slight pushing force is applied to the push rod head, the
push rod is automatically out from the adjuster body.
Make sure that the adjuster works properly by check-
ing no slack made at point A.
• Turn the crankshaft clockwise and recheck the cam position.
(3-101)
10 N·m (1.0 kgf-m, 7.0 lb-ft)
180˚