Suzuki GSX-R750 Service Manual page 109

3-56 ENGINE
• Remove the driveshaft left bearing dust seal from the retainer
using the special tool.
 09913-50121: Oil seal remover
Installation
• Install the bearings with the special tool.
 09913-70210: Bearing installer set (1 32)
NOTE:
The stamped mark side of the gearshift shaft bearing faces out-
side.
• Install new oil seal with the special tool.
 09913-70210: Bearing installer set (22)
• Apply SUZUKI SUPER GREASE "A" to the oil seal lip.
 99000-25010: SUZUKI SUPER GREASE "A"
• Install the bearing with the special tool.
 09913-70210: Bearing installer set (68)
NOTE:
The stamped mark side of the driveshaft left bearing faces out-
side.
(2, 3 20)
(or equivalent grease)