• Tighten the camshaft journal holder bolts in the ascending
order of numbers to the specified torque.
Camshaft journal holder bolt: 10 N·m (1.0 kgf-m, 7.0 lb-ft)
The camshaft journal holder bolts are made of a spe-
cial material and much superior in strength, compared
with other types of high strength bolts.
Take special care not to use other types of bolts.
12
26
25
11
• Remove the clamps.
CAM CHAIN TENSION ADJUSTER
• Holding the cam chain tension adjuster as shown, compress
the plunger by turning the adjuster body until the outer circlip
A fits the groove B. (3-31)
Do not turn the adjuster body until the outer circlip A
passes over the groove B, or the plunger may not be
automatically out from the adjuster body even push-
ing force is applied on the head.
16
14
(4)
20
18
(3) 17
19
15
13
8
(2)
22
(6)
(1) 21
(5) 23
7
ENGINE
3-99
10
24
9