Suzuki GSX-R750 Service Manual page 41

2-24 PERIODIC MAINTENANCE
BRAKE PADS
Front brake
The extent of brake pad wear can be checked by observing the
grooved limit line A on the pad. When the wear exceeds the
grooved limit line, replace the pads with the new ones.
(8-65)

Replace the brake pads as a set, otherwise braking
performance will be adversely affected.
Rear brake
The extent of brake pad wear can be checked by observing the
grooved limit line B on the pad. When the wear exceeds the
grooved limit line, replace the pads with the new ones.
(8-76)

Replace the brake pads as a set, otherwise braking
performance will be adversely affected.
BRAKE PEDAL HEIGHT
• Loosen the lock-nut 1.
• Turn the push rod 2 until the brake pedal height becomes 65
– 75 mm (2.6 – 3.0 in) A below the top of the footrest.
• Tighten the lock-nut 1 securely.
 Rear brake master cylinder rod lock-nut:
 Brake pedal height A:
Standard: 65 – 75 mm (2.6 – 3.0 in)
18 N·m (1.8 kgf-m, 13.0 Ib-ft)