Reassembly - Suzuki GSX-R750 Service Manual

Hide thumbs Also See for GSX-R750:

Table of Contents

• Move the inner rod by hand to examine it for smoothness.

• If any defects are found, replace inner rod/damper rod (car-

tridge) with a new one.

REASSEMBLY

Reassemble the front fork in the reverse order of disassembly.

Pay attention to the following points:

OIL SEAL AND DUST SEAL

• Install the dust seal, oil seal stopper ring, oil seal and oil seal

retainer onto the inner tube.

2 Oil seal stopper ring

4 Oil seal retainer

* When installing the oil seal to outer tube, be careful

not to damage the oil seal lip.

* Avoid using solvents for washing to prevent oil seal

* Apply fork oil to the Anti-friction metals and lip of the

* Make sure that the oil seal stopper ring has been fit-

ted securely.

• Insert the inner tube into the outer tube and fit the oil seal and

dust seal with the special tool.

 09940-52861: Front fork oil seal installer

Stamped mark on the oil seal should face outside.

Show Quick Links

Table of Contents