10-18 SERVICING INFORMATION
6 N·m
(0.6 kgf-m, 4.5 lb-ft)
*2
1 Rear combination light
2 EXCVA
3 AP sensor
4 Starter relay
5 Turn signal/side-stand relay
6 TO sensor
7 Integrated clamp
Wiring harness
Position light (LH)
Turn signal light (RH)
Clamp
8 Brake light switch
9 Horn
0 Regulator/rectifier
*1 Lock part of the clamp should face inside.
*2 White marking.
*3 Pass the lead wire through under the frame bridge.
*4 To fan motor
Handlebar switch (RH)
*1
Iginition switch
Clamp
Wiring harness
Battery - lead wire
*3
Guide
*4