Excv/Exhaust Pipe, Muffler Removal - Suzuki GSX-R750 Service Manual

6-10 EXHAUST SYSTEM
Measure the position sensor output voltage at fully open posi-
tion.
 Position sensor output voltage
EXCV is fully open: 3.7
If the measured voltage is more than specification, adjust the
No.2 cable adjuster as follows:
• Set the EXCVA to adjustment position. (6-4)

Adjusting the No.2 cable with the EXCV fully opened
can damage the EXCVA. Be sure to adjust the No.2
cable with the EXCV set in adjustment position.
• Turn out the No.2 cable adjuster 1.
• Repeat the above procedure until the output voltage comes
within the specified value.
 Position sensor output voltage
EXCV is fully open: 3.7
• After adjusting the EXCV cables, perform 2nd step to confirm
C46 is not indicated.

EXCV/EXHAUST PIPE, MUFFLER REMOVAL

• Remove the frame cover. (8-8)
• Remove the under cowling. (8-5)
• Lift and support the fuel tank. (5-3)
• Disconnect the EXCV cables 1 and 2 from the EXCV pul-
ley.
• Remove the EXCV cable bracket 3.
• Disconnect the HO2 sensor lead wire coupler. (For E-02, 19)
(4-107)
• Remove the HO2 sensor. (For E-02, 19) (4-107)
• Remove the radiator mounting bolts 4.
• Move the radiator forward.

Be careful not to bent the radiator fin.
output voltage
(+ Yellow – - B/Br)
output voltage
V
4.5 (V)
4.5 (V)