WATER PUMP
• Apply SUZUKI SUPER GREASE "A" to the O-ring.
Use a new O-ring to prevent oil leakage.
99000-25010: SUZUKI SUPER GREASE "A"
• Install the water pump.
NOTE:
Set the water pump shaft end A to the oil pump shaft B as
shown.
• Tighten the water pump mounting bolts to the specified
torque.
Water pump mounting bolt: 10 N·m (1.0 kgf-m, 7.0 lb-ft)
• Apply engine coolant to the O-ring.
Use a new O-ring to prevent engine coolant leakage.
• Install the water inlet connector 1.
Water inlet connector bolt: 10 N·m (1.0 kgf-m, 7.0 lb-ft)
(or equivalent grease)
ENGINE
3-85