Excva Pulley Inspection; Excva Installation - Suzuki GSX-R750 Service Manual

• Hold the EXCVA pulley with an adjustable wrench, and
loosen the pulley mounting bolt.

* When loosening or tightening the pulley bolt, be sure
to fix the pulley with an adjustable wrench, or EXCVA
may get damaged.
* Do not use the adjustable wrench to turn EXCVA pul-
ley so as not to cause damage to the internal gear of
EXCVA.
• Remove the EXCVA pulley from the EXCVA body.

EXCVA PULLEY INSPECTION

• Inspect the EXCVA pulley groove for wear and damage.
• If any defects are found, replace the EXCVA pulley with a new
one.

EXCVA INSTALLATION

• Install the EXCVA pulley 1 to the shaft 2.
NOTE:
Align the shaft's line A and cable slots B as shown.
• Hold the EXCVA pulley with an adjustable wrench, and then
tighten the EXCVA pulley mounting bolt to the specified
torque.
 EXCVA pulley mounting bolt: 5 N·m (0.5 kgf-m, 3.5 lb-ft)

When loosening or tightening the pulley bolt, be sure
to fix the pulley with an adjustable wrench, or EXCVA
may get damaged.
EXHAUST SYSTEM 6-5