Suzuki GSX-R750 Service Manual page 136

OIL PAN
• Install new gasket.
• Install the plate 1 and oil pan.
NOTE:
* Fit the clamp to the bolt A .
* Fit new gasket washer to the bolt B .

* Replace the bolts with new precoated ones for plate 1.
* Use new gasket and gasket washer to prevent oil
leakage.
• Tighten the oil pan bolts diagonally to the specified torque.
 Oil pan bolt: 10 N·m (1.0 kgf-m, 7.0 lb-ft)
OIL PRESSURE SWITCH
• Apply SUZUKI BOND to the thread part of oil pressure switch
and tighten oil pressure switch to the specified torque.
 99000-31140: SUZUKI BOND "1207B"
 Oil pressure switch: 14 N·m (1.4 kgf-m, 10.0 lb-ft)
NOTE:
Be careful not to apply SUZUKI BOND to the hole of thread end.
OIL COOLER
• Apply SUZUKI SUPER GREASE "A" to the O-ring and install
the oil cooler.
 99000-25010: SUZUKI SUPER GREASE "A"
• Apply THREAD LOCK to the bolts and tighten them to the
specified torque.
 99000-32110: THREAD LOCK SUPER "1322"
 Oil cooler mounting bolt: 10 N·m (1.0 kgf-m, 7.0 lb-ft)

Use a new O-ring to prevent oil leakage.
(or equivalent grease)
(or equivalent thread lock)
ENGINE 3-83