3-78
ENGINE
• Insert the right and left thrust bearings with oil groove B fac-
ing the crank web.
NOTE:
Right thrust bearing has green painting.
BALANCER SHAFT
• Install the thrust washers 1, 2 and oil seal 3.
• Apply a MOLYBDENUM OIL SOLUTION to each balancer
shaft journal and bearing lightly.
MOLYBDENUM OIL SOLUTION
• Set the balancer shaft so that its punch mark A is aligned
with the index B on the crankshaft.
COUNTERSHAFT
• Install the C-ring 1 and bearing pin 2 to the upper crank-
case.
• Install the countershaft assembly to the upper crankcase.
NOTE:
Align the C-ring with the groove of bearing and the bearing pin
with the indent on the bearing.