Matrix Vision System Manual page 33

Matrix
Allowed and Denied Lists accordingly.
Step 2
Use following command to program numbers in the allowed list:
1202-1-Allowed List-Location Index-Number-#*
Where
Allowed list is from 0 to 7.
Location Index is from 00 to 15.
Number is a complete telephone number, truncated telephone number or an area code.
Use following command to program same numbers in all the allowed lists:
1202-*-Location Index-Number-#*
Use following command to default all number strings in the allowed list:
1201-1-Allowed List-#
Where,
Allowed List is from 0 to 7.
Use following command to default all number strings in all the allowed lists:
1201-*-#
Step 3
Use following command to program numbers in the denied list:
1204-1-Denied List-Location Index-Number-#*
Where
Denied list is from 0 to 7.
Location Index is from 00 to 15.
Number is a complete telephone number, truncated telephone number or an area code.
Use following command to program same numbers in all the denied lists:
1204-*-Location Index-Number-#*
Use following command to default all number strings in a denied list:
1203-1-Denied List-#
Where,
Denied List is from 0 to 7.
Use following command to default all number strings in all the denied lists:
1203-*-#
Example 1:
Program Allowed List and Denied List for following constraints:
1. Allow all numbers except 'ISD'.
2. Only local calls should be allowed in dynamic lock condition.
3. All calls starting with '95' and '0' should get disconnected after 180 seconds.
Solution:
First examine the default lists.
1. This condition can be fulfilled using default denied list 5.
2. This condition can also be fulfilled using default denied list 1.
3. This condition can also be fulfilled using default denied list 3.
Since all the constraints can be satisfied with default lists then there is no need to program these lists.
33
Vision System Manual