Matrix Vision System Manual page 144

Matrix
How it works?
System Engineer (SE) Mode
• SE mode allows SE to program the system for main basic functions like assigning flexible numbers to the
stations, programming destinations for trunk lines, Activation of DOSA facility on few lines, assigning feature
access levels to stations, etc.
• In this mode, only SE can do programming.
• All the commands are allowed from SE mode.
• This mode is password protected so that no other person can make any unauthorized alterations and
subsequent misuse of features and facilities.
• System engineer is a person who programs the system as per the need. He is the person who makes major
alternations in the system. No other person can change the system settings without his knowledge provided
the password is kept secret. Depending upon the organization structure, a person is designated as system
engineer.
How to use it?
1 Lift the handset.
2 Dial 1#91-SE Password.
• SE password is 4-digit secret code used to avoid unauthorized access to SE mode.
• By default, SE password is 1234.
• In case the SE password is forgotten, the same can be set to its default value. For more details, please refer
section 'System Security (Passwords)'.
• System gives programming tone on entering SE mode.
• If the SE password is not entered correctly, system gives error tone.
• Only one person can enter SE mode at a time.
• To exit SE, dial '00' from the programming tone. You get Matrix dial tone.
System Administrator (SA) Mode
• SA mode allows SA to change few system settings without entering the SE mode. It is a subset of the full
blown SE mode and hence supports only a few programming commands.
• In this mode, only SA or SE can do programming.
• This mode is password protected so that no other person can make any unauthorized alterations and
subsequent misuse of features and facilities.
• System Administrator is a person who carries out routine jobs like taking SMDR printouts, making operator
absent/present, etc. Generally an operator in an organization is selected as a System Administrator.
How to use it?
1 Lift the handset.
2 Dial 1#92-SA Password.
• SA password is a 4-digit secret code used to avoid unauthorized access to SA mode.
• By default, SA password is 1111.
• In case the SA password is forgotten, the same can be set to its default value from the System Engineer (SE)
mode.
• System gives programming tone on entering SA mode.
• If the SA password is not entered correctly, system gives error tone.
• Only one person can enter SA mode at a time.
• To exit SA, dial '00' from the programming tone. You get Matrix dial tone.
• Following programming commands are allowed from the SA mode:
• SMDR Reports Printing Commands.
• Day to Night and Night to Day switching command. (if programmed in manual mode).
• Configuration Reports commands.
144
Dial tone
Programming tone
Dial tone
Programming tone
Vision System Manual