Matrix Vision System Manual page 127

Use following command to program Number Index:
3422-1-Number Index-Number String-#*
Where,
Number Index is from 0 to 9.
Number string can be a complete telephone number, a truncated telephone number or an area code. Number
string is of maximum 16 digits.
By default, no number string is programmed in Number Index.
The number string table looks like:
Number Index
0 (16 digits allowed)
1 (16 digits allowed)
:
:
8 (16 digits allowed)
9 (16 digits allowed)
Use following command to program the Service Provider (SP) sequence for the each number index:
3423-1-Number Index-SP0-SP1-SP2-SP3
Where,
Number Index is from 0 to 9.
SP0: Cheapest service provider.
SP1: Cheaper service provider.
SP2: Cheap service provider.
SP3: Costly service provider.
Please note that it is mandatory to complete this command. If fewer number of service providers are used, then
repeat the cheapest service provider for remaining.
Use following command to default Number wise LCR table:
3421-*-#
The default number wise LCR table would look like:
Number Index
B
B
:
B
Mixed LCR
If mixed LCR is to be used, make following table on a plain paper.
Number Index
Time Zone Index
0 (08.00 to 12.00)
1 (12.00 to 16.00)
2 (16.00 to 20.00)
3 (20.00 to 24.00)
Suppose we have four basic service providers viz. BSNL (SP#0), TATA (SP#1), Reliance (SP#2) and Hughes
(SP#3).
For Area code 022 (Number String 00) in time zone 08.00-12.00, (time zone 0), BSNL provides cheapest
services followed by TATA, Hughes and reliance. Then the first entry in first row would be as shown.
Vision System Manual
Number String
:
:
Service Providers in hierarchical order of increasing cost
0 1
0 1
: :
0 1
0(022)
0, 2, 3, 1
1, 2, 0, 3
0, 2, 3, 1
3, 0, 2, 1
2
2
:
2
1(011) 2(033)
3, 0, 1, 2 3, 1, 2, 0
0, 2, 3, 1 2, 3, 1, 0
3, 1, 2, 0 0, 1, 2, 3
1, 0, 3, 2 2, 3, 1, 0
3
3
:
3
........ 9(95)
0, 1, 2, 3
........
2, 1, 3, 0
........
0, 1, 2, 3
........
2, 0, 3, 1
........
Matrix
127