Matrix Vision System Manual page 157

Step 1
Use following command to program a number in the scheduled dialing table:
2002-1-Number Index-Number-#*
Where,
Number Index is from 0 to 7 (Maximum eight different numbers can be dialed).
Number is the number to be dialed. The number can have maximum 16 digits.
Use following command to clear all the numbers in the scheduled dialing table:
2002-*-#
Step 2
Use following command to program trunk access group for the number to be dialed out:
2003-1-Number Index-Trunk Access Group
Where,
Number Index is from 0 to 7.
Trunk Access Group is from 0 to 7.
Step 3
Use following command to program time at which the number is to be dialed out:
2004-1-Number Index-Time
Where,
Number Index is from 0 to 7.
Time is in Hour-Minute, 24-hour format.
Step 4
Use following command to default all the parameters related to Scheduled dialing:
2001-#
By default:
No numbers are programmed in the Scheduled dialing table.
Trunk Access Group = 0.
Scheduled Time = 00:00.
Important Points:
• If this facility is used to lock the STD facility on the trunk line. Then it is advisable to program only one trunk
with STD facility in the trunk access group because while dialing out the number the system selects the free
trunk from the trunk access group.
• To know programming details, please refer "Configuration Reports".
Relevant Topics:
1. Real Time Clock 147
2. Trunk Access Groups 189
Vision System Manual
=X=X=
Matrix
157