Matrix Vision System Manual page 128

Matrix
For Area code 011(Number String 01) in time zone 08.00-12.00 (time zone 0), Hughes provides cheapest
services followed by BSNL, Reliance & TATA, then the second entry in first row would be as shown.
For Area code 022(Number String 00) in time zone 12.00-18.00 (time zone 1), cheapest services are offered by
Reliance followed by TATA, BSNL and Hughes. The 1
Use following command to program Time Zone Index for Mixed LCR:
3432-1-Time Zone Index-Start Time-End Time
Where,
Time Zone Index is from 0 to 3.
Start Time is the time in HH:MM format when the Time zone starts.
End Time is the time in HH:MM format when the Time zone ends.
By default, Time zone is 00.00 to 23.59.
The time zone table looks like:
Time Zone Index
0
1
2
3
Use following command to program Number Index for Mixed LCR:
3433-1-Number Index-Number String-#*
Where,
Number Index is from 0 to 9.
Number string can be a complete telephone number, a truncated telephone number or an area code. Number
string is of maximum 16 digits.
By default, Number String is 'Blank'.
The number string table look like:
Number Index
0 (16 digits allowed)
1 (16 digits allowed)
:
9 (16 digits allowed)
Use following command to program the Service Provider (SP) sequence for the each Time Zone:
3434-1-Number Index-Time Zone Index-SP0-SP1-SP2-SP3
Where,
Number Index is from 0 to 9.
Time Zone Index is from 0 to 3.
SP0: Cheapest service provider.
SP1: Cheaper service provider.
SP2: Cheap service provider.
SP3: Costly service provider.
Please note that it is mandatory to complete this command. If fewer number of service providers are used, then
the repeat the cheapest service provider for remaining SPs.
Use following command to default Mixed LCR table:
3431-*-#
128
Start Time End Time
HH:MM HH:MM
HH:MM HH:MM
HH:MM HH:MM
HH:MM HH:MM
Number String
:
entry in 2 row would be as shown in the table.
st nd
Vision System Manual