Matrix Vision System Manual page 145

• Scheduled Dialing Number string command.
• Internet Ready Port command.
• Global Abbreviated Dialing command.
Important Points:
• Programming can be done at the site from any station without opening the system. However, the station
from which programming is to be done should access to programming mode.
• Station 21 is always given access to programming mode.
• System can also be programmed from a remote end from anywhere in the world. For more details, please
refer section 'Remote Programming".
• Programming is accomplished by dialing separate codes (string of digits) for different settings. This
eliminates need for entering long and confusing programming sequences. Programming commands are
broken into two parts: Codes and Values.
• The system continues to function normally even during programming. This allows the SE or SA to change the
settings without disturbing any communication.
• The SE mode and the SA mode are password protected so that no other person can make any unauthorized
alterations and subsequent misuse of features and facilities.
Steps for programming
It is advisable to program the system in following hierarchy. One may skip undesirable features' programming.
1. Real Time Clock 147
2. Time Table 181
3. Flexible Numbers 114
4. Class of Service (COS) 70
5. Trunk Access Groups 189
6. Toll Control 184
7. Call Pick Up 57
8. Station Group 163
9. Privacy 139
10. Trunk Parameters 199
11. Direct Inward Dialing 94
12. Least Cost Routing 124
13. Trunk Landing Groups 196
14. CLIP 65
15. Operator 135
16. SMDR 168
17. DOSA 100
18. Voice Message Applications 205
19. Department Call 89
20. Paging 136
21. External Call Forward 110
Relevant Topics:
1. System Security (Password) 180
2. Remote Programming 154
Vision System Manual
=X=X=
Matrix
145