Matrix Vision System Manual page 174

Matrix
1555-Call Split Flag
Where,
Call Split Flag Meaning
0 Store one call
1 Store multiple calls
If above option is selected as 'Store One Call' then it is possible to store the call with originating station or
terminating station.
Use following command to select appropriate option:
1556-Flag
Where,
Flag Meaning
0 Store the call on originating station's account
1 Store the call on terminating station's account
Supportive commands:
Use following command to clear SMDR-Incoming buffer:
1560-Reverse SE Password
Incoming Calls-Printing
• Each SMDR record has following parameters or fields:
• Serial Number.
• Calling Number (optional).
• Trunk port number on which the call was received.
• Station Number who received the call.
• Date on which the call is received.
• Time when the call arrived.
• Call Answer Duration.
• Call Speech Duration.
• Remark.
"Remark' column indicates following information:
Character Meaning
N Normal Call
D DID Call
U Unanswered Call
DU DID Unanswered Call
The reports are transferred on a computer through the RS232C (COM) port of the Vision. ASCII format is used
for this.
It is possible to generate these reports as and when the call is made i.e. online printing (provided a printer or a
computer is connected) or offline. The calls are stored in the SMDR buffer in both cases.
Incoming Printing-Online
Use following command to decide whether online printing is desired:
1570-Code
Where,
Code Meaning
0 Immediate printing of incoming calls off
1 Immediate printing of incoming calls on
174 Vision System Manual