Matrix Vision System Manual page 171

Use following command to select appropriate option:
1516-Flag
Where,
Flag Meaning
0 Store the call at originating station
1 Store the call at terminating station
Use following command to clear SMDR-Outgoing buffer:
1520-Reverse SE Password
Outgoing calls-Printing
• Each SMDR record has following parameters or fields:
• Serial Number.
• Station that made the call.
• Trunk used to make the call.
• Number dialed.
• Date on which the call is made.
• Time at which the call is made.
• Duration of the call in seconds.
• Remark.
"Remark" column indicates following information:
Character Meaning
N Normal Call
O DOSA Call
E ECF Call
A Auto Redial
The reports are transferred on a computer through the RS232C (COM) port of the Vision. ASCII format is used
for this. The report can be stored modified and printed.
It is also possible to generate these reports as and when the call is made i.e. online printing (provided
computer is connected) or offline. The calls are stored in the SMDR buffer in both cases.
Outgoing Printing-Online
Use following command to decide whether online printing is desired:
1530-Code
Where,
Code Meaning
0 Immediate printing of outgoing calls off
1 Immediate printing of outgoing calls on
In online mode whatever is stored is printed.
Outgoing Printing-Offline
Step 1: Set the filters as per requirement.
Step 2: Issue print command.
Various filters can be used to generate a report. These filters enable the user to select the type of calls to be
included in the report viz. Calls made by the particular station, calls made on a particular date or calls made
between two dates, Long duration calls. It is also possible to generate a report contains calls with desirable
combination like calls made by particular station on a particular date for duration greater than 10 minutes.
Vision System Manual
Matrix
171