Matrix Vision System Manual page 161

Step 6
Use following command to program the time gap between two trials:
3039-Duration
Where,
Duration is the time duration after which the system should try for the next number.
Duration is in minutes from 000 to 255.
By default, system tries for next number after every 1 minute.
Step 7
Please refer 'Voice Message Applications' on how to assign an Emergency message for DIP Application.
Important Points:
• This feature works on tone sensing. It is possible that there could be lot of disturbances on the trunk line and
tones may not be sensed properly. In such case, it is possible that the system might consider an immature
call as a served request. Hence it is advisable to install dedicated security devices to ensure 100% security.
• If three emergency numbers are programmed then the system first tries the first number. Then after the
programmed time duration, it tries second number. If all three numbers are found busy then system starts a
fresh from first number again.
• If the called party dials '0' during the message, the system considers it to be an acknowledgment and
suspends dialing that particular emergency number.
• To know programming details, please refer "Configuration Reports".
Relevant Topic:
1. Voice Message Applications 205
Vision System Manual
=X=X=
Matrix
161