Matrix Vision System Manual page 185

How to program?
Step 1: List the toll control to be programmed station wise.
Step 2: Check whether the requirement can be met by using default Allowed Lists and Denied Lists.
Step 3: If default allowed lists satisfy the requirement, assign allowed list to the stations using commands
4501 and 4511 for day time.
Step 4: If default denied lists satisfy the requirement, assign denied lists to the stations using commands
4502 and 4512 for night time.
Step 5: If the requirement cannot be satisfied by default allowed lists and denied lists then list down the
customized numbers to be programmed in allowed list and denied list.
Step 6: Program the numbers/number strings to be allowed in the allowed list using command 1202.
Step 7: Program the number/number strings to be denied in the denied list using command 1204.
Step 8: Assign customized allowed list to the stations using commands 4501 and 4502.
Step 9: Assign customized denied lists to these stations using commands 4511 and 4512.
Step 10: Also assign a default/customized allowed list to these stations for the locked condition using
commands 4521.
Vision System Manual
Start
Station grabs a trunk
Station dials a outside number
Does the
dialed number string
matches with any
number in allowed toll
control list?
No
Does the
number matches with
any number in denied
toll control list?
No
System dials the number
End
Yes
System dials the number
End
Yes
System gives error
tone to the user
End
Matrix
185